How To Remove Osmo Oil
Questions and Answers
We take put together a drove of frequently asked questions for y'all, and nosotros hope they are of assist. Do you still have some unanswered questions? Contact usa at info@osmo.de
Osmo sells exclusively to specialized dealers with their own warehouse, but a modest selection of products is besides available at DIY stores. Directly sales to end consumers are not possible. Via the dealer search function on our website, local dealers can be institute.
Yes, it is possible. Interior forest finishes from Osmo can also be used in outdoor areas. Since these are not protected confronting weathering and UV radiation, they may demand to be recoated more often. Even some of our exterior finishes, e.k. Osmo Landhausfarbe, can be used in indoor areas. They do not incorporate any biocides and are fifty-fifty suitable for children's toys.
Clear finishes do non contain any colour pigments. Transparent finishes stain wood and contain a small amount of color pigments so that the forest grain tin can notwithstanding be seen.
The storage stability of a product is always stated in our product data sheets or on the production label. When kept dry out and free of frost, our oil-based finishes tin can normally be stored upwards to approx. 5 years in the original closed container; for h2o-based products, the storage stability is approx. 2 years.
Product coverage can also be institute in our product data sheets. It changes from production to product and depends greatly on the status of the wood. All details on our labels refer to smooth and planed/sanded wood surfaces. Other surfaces may atomic number 82 to discrepancies in production coverage.
Leftover product and empty packaging should exist disposed of according to the local regulations (EU waste code 08 01 eleven). Only completely emptied cans tin can be recycled. Wash out any used cloth impregnated with this product immediately after use or store in an closed metal container (danger of self-ignition).
That depends entirely on the product. For Osmo Holzschutz Öl-Lasur, we recommend two coats. Osmo Einmal-Lasur, on the other hand, only needs one glaze. We recommend consulting the product descriptions on our website for details almost the correct application.
No, this should non exist washed. If the existing finish is a lacquer, our terminate cannot penetrate the wood pores and it will not adhere to the surface.
On our website, technical information on private Osmo products can exist found under the respective production page. Here yous tin can find a detailed product description equally well every bit a full announcement, safety datasheet and much more.
Yep, Osmo Landhausfarbe and Holzschutz Öl-Lasur can be produced upon request in one of 186 RAL and 1950 NCS colour tones. They are mixed to order and can be delivered throughout Germany within five to 7 days. The minimum order corporeality per colour tone is 2.five litres, and there is a mixing surcharge of €23.50 per colour tone. Plus, biocidal active ingredients for film protection against algae and fungal attack can be added to Osmo Landhausfarbe for an extra surcharge.
Products tin be thinned with a solvent, such as Osmo Pinselreiniger.
Equally soon as forest finish gets on article of clothing, it must be rubbed out with Osmo Pinselreiniger or a turpentine substitute. Once the end has dried, it is no longer possible to go information technology out completely.
Yep, the colour tones of individual products can be mixed with each other every bit desired. For example, the colour tones of Osmo Dekorwachs can exist mixed with each other to create an even wider variety of colours.
With Osmo Pinselreiniger or a turpentine substitute from a DIY store.
The durability of a wood finish not only depends on depends on the production and the location of the wood, merely also the amount of weathering.
Renovation should therefore always exist carried out in consideration of these points. By routinely observing the condition of the surface, a suitable fourth dimension to renovate can be determined.
That depends entirely on the product and the blazon of allergy. All Osmo products are based on natural vegetable oils and waxes. Nosotros completely forego the use of any and then-called "natural solvents", such as orange oil, which can cause allergies. Upon request, we tin send you a detailed full announcement with all ingredients. Alternatively these can also exist plant on our website nether the private product pages.
Osmo Wohnraum-Wachs is a water-based finish. Osmo Dekorwachs, on the other paw, is based on oils and waxes. Plus Wohnraum-Wachs is thinner and therefore information technology dries faster.
It is non absolutely necessary to habiliment protective wear for personal safety. Nevertheless, it is useful to avoid contact to hands, optics etc. When sanding, a dust mask should always be worn.
Yes, upon request 5 ml sample sachets tin be ordered from Osmo costless of charge.
Only one glaze is needed for Einmal-Lasur.
An impregnation is only necessary when coating raw untreated Bandbox or Pine in outdoor areas. Osmo Holz-Imprägnierung WR protects the within of wood. Afterwards Osmo Holzschutz Öl-Lasur can exist applies, which provides protection from the outside.
We only recommend Osmo UV-Schutz-Öl for vertical surfaces. The UV blockers in the blanket are not vesture-resistant and cannot withstand longer periods of waterlogging.
Impregnation offers protection for the inside of wood. It is a articulate blanket that acts a preventive measure against plant and fauna wood pest, such as rot, blue stain and insect attack. Moving-picture show protection protects the wood surface confronting mould and algae attack.
The small black spots on the surface could be either a mould or fungal set on. This happens due to moisture or other environmental influences and occurs often in shady areas and about water or plants. We recommend removing the growth with Osmo Gard Clean, Holzentgrauer or Intensivreiniger. Afterwards the wood should exist treated with a finish with a suitable film protection, due east.k. Osmo Holzschutz Öl-Lasur.
Yes, there is a coating for polymer composites. WPC & BPC Pflege-Öl is suitable for the clear upkeep and refreshing of weathered polymer composites, such as WPC or BPC.
Before the handling, we recommend thoroughly cleaning the whole surface with Osmo WPC & BPC Reiniger.
Information technology is non recommended to treat freshly installed intact polymer composites with WPC & BPC Pflege-Öl as these surface cannot absorb the coating.
No, there are no suitable finishes because bamboo is a blazon of grass that does not really accept any pores, in which the finish can exist absorbed.
Osmo Landhausfarbe cannot exist used on decking. Garden decks are mechanically loaded surfaces and Landhausfarbe is not wear-resistant. Correspondingly but wood stains, e.g. Osmo Holzschutz Öl-Lasur or Terrassen-Öl, are suitable for such areas.
Osmo UV-Schutz-Öl Actress 420 has film protection, which protects the outside of the wood against mould, algae and fungal attack. Osmo UV-Schutz-Öl does non have this production feature.
Our woods finishes enhance the colour of the wood and bring out the wood grain. Even when the finish is dry, the wood surface withal looks as if it were wet. This is what nosotros call the "permanent moisture effect". To preclude this, use Osmo Hartwachs-Öl Effekt Natural, which contains a small-scale corporeality of white pigments to counteract this consequence.
Freshly coated flooring surfaces are accessible as shortly as Hartwachs-Öl has dried for approx. 24 hours. Furniture with legs, which allows air to circulate beneath it, can too be placed on the flooring after approx. 24 hours. Objects under which air cannot circulate, such as rugs or mats, should not be placed on the floor for at least one week, subsequently which Hartwachs-Öl should be completed cured.
The odour that develops afterward the application is typical for oil finishes. This happens when the end begins to oxidize. It is non poisonous and perfectly rubber for humans, animals and plants. More often than not all Osmo products are completely odourless after they have dried for ii-3 weeks under good ventilation and are thoroughly cured.
This all depends on how information technology is used. For routine and gentle mopping, we recommend calculation Osmo Wisch-Fix to mop water. This is sold individually and in Osmo Fußboden-Reinigungsset. Optimal tools for flooring upkeep are constitute in the Osmo Fußboden-Reinigungsset. If flooring starts to look deadening, just refresh it with Osmo Wachspflege- & Reinigungsmittel. This can be done on small areas, e.g. near doors or on loftier traffic areas, without whatsoever visible transitions. If the signs of wearable are more substantial, flooring should be recoated with the aforementioned Osmo product.
A primer is applied earlier the application of a blanket to improve adhesion to the wood. It does non provide the forest any protection and is not necessary for whatever of the Osmo wood finishes. Impregnation is solely a protective measure out for wood to extend its durability and to protect information technology confronting harmful organisms.
Since our outside products are all based on oils and oils are not susceptible to frost, they tin can be used at temperatures below freezing. Information technology is important is that the surface to glaze is clean, dry and complimentary of frost. For an optimal awarding, you should store the product at room temperature for approx. 24-36 hours prior to finishing. Water-based products should not be stored at temperatures below 5 °C because there is risk that they may freeze. Besides, Osmo products should not be applied at temperatures above 35 °C to avoid drying too fast.
For all vertical building elements in outdoor areas, you tin use clear Osmo UV- Schutz-Öl (410 or 420). For horizontal surfaces, such equally garden decks, there is not clear protection against greying. We recommend using a pigmented Osmo Terrassen-Öl.
For wood species susceptible to bluish stain, such equally Spruce or Pine, it is recommended to apply impregnation to protect the forest before finishing the surface with an Osmo product. Woods species rich in wood extractives, such equally Larch or Douglas Fir, impregnation tin can exist practical but it is non necessary.
Pressure impregnated wood can be coated with any of our exterior wood finishes, but information technology should weather for at least half dozen-8 weeks later installation before applying the finish. In this time, excess impregnation is washed out of the forest so at that place is infinite in the wood for the oil finish to exist absorbed. Due to the colour tone of the pressure impregnation, the colour of the wood stain may look different to the sample on the label.
© 2022 Osmo Holz und Color GmbH & Co. KG
Source: https://www.osmo.de/en/service/faqs/
Posted by: kingfroin1959.blogspot.com
0 Response to "How To Remove Osmo Oil"
Post a Comment